Een prop block is een stukje hout met exact bepaalde vorm waaruit relatief
eenvoudig een efficiënte propeller te snijden is. Om het juiste prop block te
kiezen kan je het best eerst het artikel over propellers
doorlezen. Wanneer de gewenste diameter er niet bij staat kan een ontwerp ook
worden vergroot of verkleind zonder dat daarbij de P/D anders wordt.
Nederlands |
|
English |
Wout Moerman P/D = 1,57
|
|
|
Deze propeller wordt gesneden uit een balkje hout met een vierkante
doorsnede
D = 15 cm (6 inch) P/D (60%) = 1,57 P/D (tip) = 1,57 bladbreedte = 2,2 cm (15%) |

afmetingen (dimensions) in centimeters |
This prop is cut from a block with a square cross section
D = 15 cm (6 inch) P/D (60%) = 1.57 P/D (tip) = 1.57 blade width = 2.2 cm (15%) |
Biplane Sportster
|
|
|
Louis Garami: Carve the propeller out of a medium hard block. Give 1-1/6” inside camber then carve the outside so that the thickest part is about 1/8” D = 25 cm (10 inch) P/D (60%) = 1,5 P/D (tip) = 2,0 bladbreedte = 3,6 cm (18%)
Afmetingen prop block (l×b×h): 20 × 2,8 × 2,2 cm Bij dit ontwerp is de dikte van de tip van het prop block 1,6 cm. Om een helische spoed verdeling te krijgen (P/d = 1,5) moet de tip van het prop block dunner worden gesneden, namelijk 1,3 centimeter. |

afmetingen (dimensions) in inches |
Louis Garami: Carve the propeller out of a medium hard block. Give 1-1/6” inside camber then carve the outside so that the thickest part is about 1/8” D = 25 cm (10 inch) P/D 60% = 1,5 P/D tip = 2.0 blade width = 3.6 cm (18%, 1.4")
In this design the tip of the prop block is 1.6 cm (5/8"). To get a helical pitch distribution (P/d = 1,5) the tip of the prop block must be reduced to 1.3 cm (3/8"). |
Mystery Tailless
|
|
|
D = 12,5 cm (5 inch) P/D = 2 bladbreedte = 2,5 cm (20%) |

afmetingen (dimensions) in inches |
D = 12.5 cm (5 inch) P/D = 2 Blade width = 2.5 cm (20%, 1")
dimensions in inches |
Little Junior
|
|
|
Air Trails, 1939 D = 27,5 cm (11 inch) P/D(tip) = 2,0 |

afmetingen (dimensions) in inches |
Air Trails, 1939 D = 27,5 cm (11 inch) P/D(tip) = 2,0 |